GE Sensing Druck PC6-IDOS, User Manual

Page: 37 / 70

29 Page
2.6 Log (continued)
2.6.4 Status:
2.6.5 Export and Import:
Use this option to enable or disable logging function.
•
Select 'Status' from the log menu using the key and
then press the key.
• Select 'On' or 'Off' and then press the key.
• The display returns to the log menu.
Once a file has been set using the instructions given, the
logging process is shown as active with a disc shaped icon in
the top left hand corner of the display.
If you should press the
key whilst logging is in progress
then the following screen appears:
Select 'Yes' or 'No' and then press the key.
Pressing the key allows direct access to the log
menu. This is only possible if the log status icon is flashing in
the top left hand corner of the display.
See 1 13.2 and 1.13.3 on page 19 for and
procedures.
Note:
. Export Import
2.7 RS232
RS232 standard communication protocol is available on the
PC6-IDOS. Select the RS232 functions as follows:
•
Connect the PC6-IDOS to a printer or computer as
described in paragraph 1.6.5 on page 11.
• Switch on PC6-IDOS.
• Select the Set menu by pressing the key twice.
• Select 'RS232' option using the key, then press the
key. The RS232 menu is displayed as below:
• Select 'Status' using the key. Choose 'On' or 'Off'
option with the key and then press the key.
The display returns to the RS232 menu.
• Select 'Baud-rate' using the key and then press
the key. Select the required baud rate (1200, 2400,
4800, 9600, 19200 or 38400) using the keys
and then press the key.
• Select the 'Stop bits' using the key and then press
the key. Select either 1 or 2 bits with the
keys and then press the key.
2.7.1 Status:
2.7.2 Baud Rate:
2.7.3 Stop Bits:
ENTER
ZERO
ENTER
ZERO
ENTER
ZERO
PRINT
LOG
MENU
MENU
ENTER
ZERO
ENTER
ZERO
ENTER
ZERO
ENTER
ZERO
ENTER
ZERO
ENTER
ZERO
ENTER
ZERO