GE Sensing Druck PC6-IDOS, User Manual

Page: 13 / 70

PRESSURE DISPLAY -
Selection of pressure unit.
inches of m ercury (at 0°C) millimetres of m ercury (at 0°C)
user defined unit second user defined unit
Returns to menu 1
Displays the maximum pressure measured since the last reset (60 samples per second).
Displays the pressure as a percentage between user pre-set high and low alarm values.
Displays the pressure at the time of tare.
Volts / milliamps functions
Displays the following input measurements.
Displays actual input measurements.
Displays converted input measurements.
Returns to Pressure Display.
Indicates the status of the pressure switch under test (OPEN/CLOSED).
Allows the PC6-IDOS to measure pressure changes over time.
Starts the leak test.
Sets the leak test time.
Returns to Pressure Display.
Allows the user to monitor the temperature around the selected pressure transducer in pressure display mode.
Allows the user to monitor the date & time of the on board real time clock in pressure display mode.
Allows the user to view or manipulate a file previously stored in the filing system.
Allows the user to see logged file.
Outputs a logged file
Imports a file (refer to ‘
instructions for exporting files to PC6-IDOS)
Deletes a single file or all logged files.
Returns to Pressure Display.
Returns to Pressure Display mode.
Allows the user to operate the PC6-IDOS for pressure measurements. (Display Functions)
SiCal PRO’
(SHORTCUT: To abort any menu level, simply press the MENU key).
Menu 1
Unit
inHg mmHg
UNIT1 UNIT2
Exit
Max
%
Tare
V / mA
Measure
Actual
Converted
Exit
Switch
Leak
Start
Set-Time
Exit
Temp C
Date & Time
File
View
Export
Import
Delete
Exit
Exit
bar millibar
m ega p ascals kilo p ascals
pounds force per square inch kilograms force per square centimetre
atmospheres i inches of w ater (at 4°C)
metres of water (at 4°C) millimetres of water (at 4°C)
Displays the minimum pressure measured since the last reset (60 samples per second).
Displays the following outputs (status must be ON - see ‘Setup’ in Menu 2)
Displays actual output measurements.
Displays converted output measurements.
Displays Pressure to Volts / milliamps conversion.
Returns to Pressure Display.
Returns to pressure display
bar mbar
MPa kPa
psi kg/cm²
atm nH O
mH O mmH O
Min
Source
Actual
Converted
P to V / P to mA
Exit
Exit
2
2 2
FUNCTIONS (MENU 1)
5 Page