GE Sensing Druck PC6-IDOS, User Manual

Page: 26 / 70

1.13 File
This function allows the user to view, export, import and
delete previously stored files.
To use the filing system proceed as follows:
•
Switch the unit on.
• Press the key once and scroll to 'File' using the
key and press .
To view a file, proceed as follows:
• Select ‘View' using key and press .
• The latest filename is shown in the bottom left hand side
of the display. The record count is shown in the bottom
right hand side. To select this file press
. If another
file is required then scroll through the filenames using
the
keys and then press key.
• To move through the record now selected, press the
key or the
key. This will first show the
‘IPM / EPM' serial number from which data was read.
• To view the following records in the selected file use the
or key to advance to the next screen.
Date & Time
Pressure Data
2nd line function
Next reading
Pressing the or key will enable the user to go
through the records. Once the last record has been viewed
an **END** message is displayed.
The records then 'wrap around' so the user can move to the
first or last file record using the
keys.
At the time of logging, if the pressure is above or
below the set limits then a 'High' or 'Low' message will
appear after the Pressure Data screen.
1.13.1
Time & Date
Note:
18 Page
MENU
ENTER
ZERO
ENTER
ZERO
ENTER
ZERO
ENTER
ZERO
ENTER
ZERO
ENTER
ZERO
ENTER
ZERO
One
Complete
Reading
‘N’ = Normal Log
‘C’ = Calibration procedure
Number of records
Transducer accuracy
(e.g. 253 = 0.025%)