GE Security Simon XT, Installation Manual

Page: 35 / 84

Chapter 3
Installing the system
25
Full line seizure wiring with one premises phone
If a single phone is all that exists on the premises, full line seizure can be accomplished without an RJ31X
(
Figure 8 on page 25).
1. Disconnect the phone from the premises phone jack and plug it into the panel PHONE jack
A
. This
jack is disconnected automatically whenever the panel reports.
2. Connect the included phone cord to the panel LINE jack and the premises phone jack
B
.
Note: If customers add phones or other phone devices to another phone jack, full line seizure no longer exists. Inform them to
contact you if they want to add a phone or other device so that you can rewire for full line seizure by adding an RJ31X.
Figure 9. Full line seizure wiring with single landline phone
Pb
A
B
Line premises phone
Premises phone jack