GE Security Simon XT Page 38 Installation Manual Download

Page: 38 / 84

Simon XT

Installation Manual

Installing X10 modules

To install lamp and appliance modules, do the following:

1. Set the unit code dial to a unit number between 1 and 8.

2. Set the housecode for the installation.

3. Plug the module into a wall outlet.

4. Plug the lamp/appliance into the module.

To install universal modules, do the following:

1. Set the unit code dial to a unit number different from all other X10 modules (between 1 and 8).

2. Set the housecode for the installation.

3. Set the module switches to momentary and relay only.

4. Connect the module terminals to the desired device terminals.

5. Plug the universal module into a wall outlet.

CAUTION:

Do not plug in appliances or lamps with 300-watt or larger bulbs into Lamp Modules

Summary of Contents for Simon XT





















































































Search results

Summary of Contents for Simon XT

Reviews:

Related manuals for Simon XT

Brands by name

Popular brands

GE Security Simon XT, Installation Manual

Search results

Summary of Contents for Simon XT

Reviews:

Related manuals for Simon XT

Brands by name

Popular brands