GE Security 60-911, User Manual

Page: 20 / 32

Simon Security System
14
Note
Because different codes can
be entered using the same
button presses you have to
use caution when program-
ming the panic code. You
need to ensure that the
panic code does not use the
same button presses as
other access codes. For
example if the master code
is 1234, do not program the
panic code to be 2244. The
panel would interpret these
codes to be the same code.
Your system may be set up so that the master code or an access code is required when
arming. If so, the panel will prompt you to enter a code when you attempt to arm the
system.
¾
How to change an Access Code:
1.
Open the cover
of the panel.
2. The panel voice prompts you to Use numbered keys to enter ID. Enter your mas-
ter access code
using the numbered keys.
3. The panel voice prompts you to Please select from START MENU.
Press the Add
button on the START MENU.
4. The panel voice prompts you to Select from MAIN MENU. Press the Access Code
button
on the MAIN MENU.
5. The panel voice responds with Master Code, press again for next access code or
DONE to select or press CANCEL to quit. Press the access code button again to
hear the next access code. When you hear the access code you wish to change
press
the DONE Button .
Note
Access Code length is set to
___ numbers.
6.
Enter 3-6 new numbers
using the numbered keys. (Access Code length is pro-
grammed by the installer.)
7. Close the panel cover .
¾ How to Delete an Access Code:
1.
Open the cover
of the panel.
2. The panel voice prompts you to Use numbered keys to enter ID. Enter your mas-
ter access code
using the numbered keys.
3. The panel voice prompts you to Please select from START MENU.
Press the
Delete button on the START MENU.
4. The panel voice prompts you to Select from MAIN MENU. Press the Access Code
button
on the MAIN MENU.
5. The panel voice responds with Access Code 1, press again for next access code or
DONE to select or press CANCEL to quit. Press the access code button again to
hear the next access code. When you hear the access code you wish to delete,
press
the DONE Button . The panel voice responds with Access Code X deleted .
6. Close the panel cover .
Light Control
Your system has the ability to control lights from the panel. A specific light or group of
lights can be programmed to turn on and off at designated times.
House Code
Note
The panel lists house codes
A - O. Ask your installer
what house code your lights
are set up on. Your house
code for lights is ____.
Refers to a group of lights that can be controlled from the panel.
Unit Number
Refers to a specific light within a house code.
¾ How to set time for light control:
1. Open the cover of the panel.
2. The panel voice prompts you to Use numbered keys to enter ID.
Enter your mas-
ter access code using the numbered keys.
Press
Add Code
Access
DONE
then use red numbers
Add Access Code
Press
Delete Code
Access
DONE
Delete Access Code