Simon Security System
7
2. Press the number (2, 4, 6, 8) of the lamp module you want to turn on.
Panel will announce,
light <number> on.
¾
Turn off individual lights that are controlled by Lamp Modules:
1. Press
Lights Off
button once.
2. Press the number (2, 4, 6, 8) of the lamp module you want to turn off.
Panel will announce,
light <number> off.
All Lights On
¾
Turn on all lights that are controlled by Lamp Modules.
1. Press
Lights On
button twice.
Panel announce,
Lights on
.
All Lights Off
¾
Turn off all lights that are controlled by Lamp Modules.
1. Press
Lights Off
button twice.
Panel announces,
Lights off.
Silent Exit
Note
Enabling Silent Exit doubles
the Exit Delay Time.
This feature silences the status beeps that accompany the exit delay (see Status Beeps).
Press
Chime Doors
after you arm the system to silence status beeps. The panel will
still beep at the beginning and end of the exit delay.
EMERGENCY
Press
FIRE, POLICE,
or
AUX
for 2 seconds (or press twice quickly) to call the cen-
tral monitoring station and notify them of a non-medical call for help.
How Your
System
Communicates
to You
Your system responds to you through the use of panel voice messages, status beeps,
alarms, and panel indicator lights.
Panel Voice Messages
When you press the buttons on the panel or the touchpads, the panel responds with
voice messages. Panel voice can be enabled or disabled (see “Options”).
These messages may respond with system information or prompt you to take further
action. For example, if you want to disarm the system and press the
DISARM
button,
the panel responds by announcing, “
Please enter your access code.”
Note
The panel will not give voice
messages during an AVM
session. Talk to your security
system dealer to see if your
panel has the AVM option.
If you press a button and the feature has not been programmed, the panel voice will
respond with “
Function not available.”
An example of this would be pressing
CHIME Special Motion
button when you have no motion sensors in your system.
Status Beeps
Note
You may receive a different
number of status beeps if
buttons are pressed quickly.
Status beeps are used to indicate key presses, status, and problems with the system.
They can be enabled or disabled (see “Options”). The following table describes status
beep activity.
EMERGENCY
FIRE
POLICE
AUX
Summary of Contents for 60-911
Page 31: ...Simon Security System 25 ...
