Simon Security System
3
HOME SECURITY
The Home Security buttons are used to arm and disarm doors, windows and motion
sensors in your system. The System Status button is used to give information on sys-
tem activity.
Arm
Turn on intrusion/burglary protection for your system. You can arm door/window sen-
sors, motion sensors or both depending on the buttons you press.
Disarm
Turn off intrusion/burglary protection for your system. Only intrusion/burglary sensors
such as doors/windows and motion are disarmed. Environmental sensors, such as
smoke, stay armed at all times.
System Status
Press to hear information about your system. If the button is lit, there is a problem with
the system. If the button is blinking, an alarm has occurred. Press the button to hear
what is wrong with the system. (See “Status Beeps”.)
Exit Delay
Exit Delay is the amount of time the system gives you to exit the home before the sys-
tem is armed (between 5 and 254 seconds). This is programmed by the installer. When
you arm you will hear beeps during the exit delay (see the table “Status Beeps” of this
manual to determine the meaning of panel/system beeps).
Your Exit Delay is set for ___ seconds.
Entry Delay
Entry Delay is the amount of time the system gives you to disarm the system after
entering the home (between 5 and 254 seconds). This is programmed by the installer.
When you enter your home you will hear beeps during the entry delay (see the table
“Status Beeps” of this manual to determine the meaning of panel/system beeps).
Your Entry Delay is set for ___ seconds.
Quick Exit
Note
The designated door may be
opened and closed once. If
you close the designated
door behind you when you
exit, you will have to disarm
the system upon reentering.
Leave the designated door
open while using the Quick
Exit feature.
The Quick Exit feature is used when someone wants to briefly leave while the home is
still armed (i.e. get the newspaper). This feature needs to be enabled by your installer.
When you press the
Disarm
button the panel will announce
exit time on.
This will
allow a designated exit door to be open for up to 2 minutes without triggering an
alarm.
Silent Exit
This feature silences the status beeps that accompany the exit delay (see Status Beeps).
Press
Chime Doors
after you arm the system to silence status beeps. The panel will
still beep at the beginning and end of the exit delay.
Subdisarm
If your system includes 24-hour protection sensors on items such as gun or jewelry
cases, you must subdisarm the panel before accessing these areas to avoid causing an
alarm. Environmental sensors, such as smoke, stay armed at all times.
Disarm
Arm
HOME SECURITY
Doors &
Windows
Motion
Sensors
System
Status
Summary of Contents for 60-911
Page 31: ...Simon Security System 25 ...
