Simon Security System
21
Testing Communication
Communication between your system and the central monitoring station should be
tested at least once per week to make sure you have the proper telephone connection.
¾
To perform a phone test:
1. Open the panel cover.
2. Enter the master access code.
3. Press the
Test
button twice. The panel will announce
Phone
test, press again to
change or done to select
.
4. Press the
DONE
button.
Note
If your system is not con-
nected to a central monitor-
ing station, you won’t be
able to perform the phone
test.
The panel will announce
Phone test is on
twice. If the test is successful the panel will
announce
Phone test ok
within 3 minutes. If the test is unsuccessful, the
SYSTEM
STATUS
button will light and within 10 minutes the panel will announce
Phone com-
munication failure
. If a phone test fails, call your security system dealer.
Setting the Clock
If the panel loses power, the clock must be set. The default setting is 12 hour mode.
Your installer can set the clock to 24 hour mode if you wish.
1. Open the panel cover. Panel announces,
Use numbered keys to enter ID.
2. Enter the master access code. Panel announces,
Please select from Start Menu.
3. Press
Clock Set
from the Start Menu. Panel announces,
Time is ****, to change
press hours and minutes, then press done.
4. Follow the arrow from the
Clock Set
button to the
Hours
keys.
5. Press the
Hours
+/
–
keys and listen to the voice prompts. Stop when panel voice
announces the correct hour.
6. Press the
Minutes
+/
–
keys and listen to the voice prompts. Stop when the panel
announces the correct minutes.
7. Press
Done
. The panel will announce the set time.
8. Close the cover.
Alarm System
Limitations
Not even the most advanced alarm system can guarantee protection against burglary,
fire, or environmental problems.
All alarm systems are subject to possible compromise or failure-to-warn for a variety
of reasons.
Testing Sensors
Device
Do This
Door/Window Sensor
Open the secured door or window.
Motion Sensor
Avoid the Motion Sensor’s view for 5 minutes, then enter
its view.
Shock Sensor
Tap the glass twice, away from the sensor. Wait at least 30
seconds before testing again.
Smoke Sensor
Press and hold the test button until the system sounds
transmission beeps.
Panic Buttons
Press and hold the appropriate panic button(s) for 3 sec-
onds.
KeyChain Touchpad
Press and hold the LOCK and UNLOCK buttons simulta-
neously for 3 seconds.
Remote Handheld
Touchpad
Press and hold the 2 EMERGENCY buttons simulta-
neously for 3 seconds.
Summary of Contents for 60-911
Page 31: ...Simon Security System 25 ...
