manualshive.com logo in svg

GE Security 60-911, User Manual

Share
Download
GE Security 60-911 User Manual Download Page 21

Simon Security System

15

3. The panel voice prompts you to 

Please select from START MENU.

 

Press the Add 

button

 on the START MENU.

4. The panel voice prompts you to 

Select from MAIN MENU. 

Press the Light Con-

trol button 

on the MAIN MENU.

5. The panel voice responds with 

House Code is *, press again to change or press 

unit number. 

This is the House Code that was set by your installer. Don’t change 

it. 

Press the Unit # button.

6. The panel responds with 

Unit #1 press again to change or select from control 

menu. 

Keep pressing the 

Unit # button 

until the correct unit is selected.

7. Press the 

Time button 

on the control menu. The panel voice prompts you, 

On 

time is **** to change press hours and minutes then press done.

8. Press the 

Hours and Minutes buttons 

to set the correct on time.

9. Press 

Done. 

Panel will announce, 

Off time is **** to change press hours and min-

utes then press done.

10. Press the 

Hours and Minutes buttons 

to set the correct off time.

11. Press 

Done. 

Panel will announce the unit number with the on and off times you 

just programmed. 

Programming 

Options

The following table is a list of options you can change.

Press 

Add

 in the 

START MENU 

and follow the voice prompts to turn an option on.

Press 

Delete

 in the 

START

 

MENU

 to turn an option off.

When entering a single digit option number (1-9), you must type a zero before the 

number (i.e. 01, 02,.....). All option numbers must be 2 digits.

Option 01 - Status Beeps 

Add

 this option to enable panel beeps. Status beeps are any beeps (including chime 

beeps) that come from the panel. See “Status Beeps”. 
1. Open panel cover. Panel announces, 

Use numbered keys to enter ID. 

2. Enter Access Code using the numbered keys. Panel announces, 

Please select from 

Start Menu.

3. Press 

Add

 from the Start menu. Panel announces, 

Select from main menu.

4. Press 

Option #

. Panel announces, 

Option 1, press again for next option or done to 

select

5. Press 

DONE

. Panel announces, 

Option 1 is on

.

Delete

 

turns off panel piezo beeps.

1. Open panel cover. Panel announces, 

Use numbered keys to enter ID. 

2. Enter Access Code using the numbered keys. Panel announces, 

Please select from 

Start Menu.

Programming Options

Option #

Add

Delete

01 - Panel Beeps

On

Off

02 - Panel Voice

On

Off

36 - Sensor Activated Light Lockout Start Time

12:00 am (mid-

night) to 11:59 pm

Off

37 - Sensor Activated Light Lockout Stop Time

12:00 am (mid-

night) to 11:59 pm

Off

41 - Chime Voice

On

Off

42 - Speaker Volume

1 - 8

8 (highest)

55 - Status Beep Volume

1 - 10

7

Summary of Contents for 60-911

































Reviews:

No comments

Brands by name

Popular brands

Load more brands