GE Medical Systems MAC 1200, Operator'S Manual, Page: 91 / 180

Revision B MAC 1200 6-5
2012250-022
Recording in 6 Lead Mode: Recording
127(
In 6 Lead mode, report sequences can also be selected with these
shortcuts.
With the system defaults, the MAC 1200 will activate the following
functions and settings.
„ The Standard report sequence (lead to channel correspondence): I, II,
III, aVR, aVL, aVF, V1, V2, V3, V4, V5, V6 (configurable); also
available: CABRERA, SEQ. NR. 4 (custom report sequence).
„ A gain of 10 mm/mV (configurable) (calibration pulse at the
beginning of the recording The unit can be set up to automatically
adapt the gain to the ECG signal (see
“6 Lead Mode” on page 9-9).
Also, the gain setting can be changed with (5, 10, 20 and 40
mm/mV).
127(
Please note that filters may suppress diagnostically relevant portions
of the signal, because they limit the transmission range. Filters
should therefore only be enabled if necessary.
selects the other 3 leads of the selected report sequence.
display the other 3 leads of the selected group of 6.
„ The writer prints at a speed of 25 mm/s, the speed can be changed
with .
„
The muscle filter is disabled (configurable).
„ The AC line filter is enabled (configurable).
„
The anti-drift system (cubic spline) is disabled (configurable).
„ Pressing will not advance the paper to the next fold (Auto
Paper Feed) (configurable).
„ Pressing after the ECG recording will print the patient data.
„ The unit advances the paper to the beginning of a new page each
time a recording is initiated (configurable).
= Standard
= CABRERA
= Seq. 4
gain
lead
format/
speed
copy