GE Medical Systems MAC 1200, Operator'S Manual, Page: 136 / 180

9-30 MAC 1200 Revision B
2012250-022
System Setup: ECG Transmission via Modem
ECG Transmission via Modem
„ Select the 12 Lead mode and press .
„ Press to display the configuration menu for 12 Lead mode.
„ Use the cursor keys to position the bar cursor on Manual copy to
HOST and confirm the selection with ([HOST]).
„
Press to clear the configuration menu.
„
Use the cursor keys to position the bar cursor on Communication and
confirm the selection with .
Selecting the Communication Protocol
This adjustment is only necessary with MAC 1200 units, because only
these devices can send data to CardioSys/CardioSoft or to MUSE.
„
Use the cursor keys to position the bar cursor on Protocol. Select the
protocol A5 if you will send data to CardioSys/CardioSoft, or select
CSI to send data to MUSE.
„ Use the cursor keys to position the bar cursor on Modem, other and
confirm the selection with .
„ Choose the modem you use from the list and confirm the selection
with .
If your modem is not included in the list, select other and enter the
required modem commands (see Chapter 5,
“Modem Setup (for
Modem Æ Other)” section).
„ When you have selected a standard modem, position the bar cursor
on Dial mode and select the appropriate mode.
„
Enter the telephone number of the receiving modem and the number
to access the public telephone network and terminate the
configuration with .
copy