GE Medical Systems Dash 3000, Service Manual, Page: 39 / 232

EQUIPMENT OVERVIEW: Technical Specifications
Revision B Dash 3000/4000 Patient Monitor 2-21
2000966-105
Environmental
Specifications
Physical
Specifications
NOTE: The system may not meet its performance specifications if
stored or used outside the manufaturer’s specified temperature
and humidity range.
Power requirements:
90-132VAC
190-264 VAC 50/60 Hz 2.0A
50/60 Hz 1.0A
Power consumption: 75 watts (fully loaded)
Cooling: Convection
Heat dissipation: 240 Btu/hr (max)
Battery operation time:
General: Battery age will affect operating time.
Operating conditions:
Ambient temperature:
While charging batteries:
Capnostat III sensor
Relative humidity:
Vibration:
Altitude:
0 to 40°C (32 to 104°F)
0 to 35°C (32 to 95°F)
10° to 40° C (50° to 104°F)
5 to 95% at 40°C
MIL-STD 810E, Method 514.4, Category 1
-610 to 4, 570 m (-2,000 to 15,000 ft)
Storage conditions (Do not
exceed):
Maximum:
Minimum:
CO2 Sensor:
Batteries: 70°C (158°F) at 95% relative humidity
–40°C (–40°F) at 15% relative humidity
–30 to 65°C (–22 to 149°F)
–20 to 60°C (–4 to 140°F)
Equipment Type: Portable per IEC 60601-1
Height:
Dash 3000
Dash 4000 26 cm (10.25 inches)
27.38 cm (10.78 inches)
Width:
Dash 3000
Dash 4000 28 cm (11.0 inches)
29.26 cm (11.5 inches)
Depth:
Dash 3000
Dash 4000 20 cm (8 inches)
24.26 cm (9.55 inches)
Weight (without batteries)
Dash 3000
Dash 4000 5.08 kg (11.2 lbs)
5.53 kg (12.2 lbs)