GE HEALTHCARE E-PSMP, Technical Manual

Page: 7 / 622

About this manual
1 - 1
2062973-004
1 About this manual
1.1 Intended use of the manual
This Module Frames and Modules Technical Manual must be used in conjunction with the
CARESCAPE modular monitor’s technical manual for important safety information.
This manual contains instructions necessary to perform planned and corrective maintenance
to the parameter modules and module frames. Use it as a guide for maintenance and repairs
considered field repairable.
Where necessary the manual identifies additional sources of relevant information and
technical assistance.
See the patient monitor’s technical manual for an overview of the patient monitoring system,
information needed for system installation and for planned and corrective maintenance.
See the supplemental information manual for the technical specifications, default settings and
compatibility information, including electromagnetic compatibility.
See the patient monitor’s user's manual for the instructions necessary to operate the device
safely in accordance with its function and intended use.
1.2 Intended audience of the manual
This manual is intended for service representatives and technical personnel who install,
maintain, troubleshoot, or repair this device.
1.3 Third party trademarks
All other product and company names are the property of their respective owners.
1.4 ESD awareness
The system complies with IEC 60601-1-2:2001 + A:2004.
In accordance with IEC 60601-1-2, modules marked with the ESD warning symbol (IEC
60417-5134) require user training in ESD awareness and prevention as follows:
•
The contents of the training are specified in the local ESD Control Program Plan, issued in
accordance with IEC 61340-5-1. The training should at least include an introduction to
ESD and its impacts on electrical devices and how to prevent it by using appropriate
personal protection equipment, proper work practices and tools.
1.5 Service requirements
General service requirements and qualification requirements for the service personnel.
Follow the service requirements listed below.
− Refer equipment servicing to GE authorized service personnel only.
−
Any unauthorized attempt to repair equipment under warranty voids that warranty.
− It is the user’s responsibility to report the need for service to GE or to one of their
authorized agents.
−
Failure on the part of the responsible individual, hospital, or institution using this
equipment to implement a satisfactory maintenance schedule may cause undue
equipment failure and possible health hazards.