GE HEALTHCARE E-PSMP, Technical Manual

Page: 578 / 622

Module Frames and Modules
16 - 14
2062973-004
•
Multi-Link 12-lead ECG trunk cable, IEC or AHA
•
Multi-Link 5-leadwire set, IEC or AHA
•
Multi-Link 5-leadwire set, C2-C6, IEC or V2-V6, AHA
Invasive pressure:
•
A multiparameter patient simulator with invasive pressure adapter cables to GE invasive
pressure connectors
•
Dual BP adapter cable (2005772-001)
Temperature:
•
A multiparameter patient simulator with temperature adapter cables to GE temperature
connectors
•
Dual temperature adapter cable
•
P/N 884515-HEL “Temperature test set” (optional)
SpO2:
•
Masimo SpO2 Test Kit includes Masimo Tester and SpO2 Sensor Adapter Cable
(2021087-001)
•
Nellcor OxiMax pulse oximeter functional tester model SRC-MAX (2007650-002)
NIBP:
•
Adult NIBP hose
•
Adult NIBP cuff
•
Infant NIBP cuff hose
•
a rigid cylinder or pipe
•
NIBP pressure manometer
NOTE: See the supplemental information manual for compatible accessories.
Defib/sync and analog output:
•
Unterminated defib sync cable (2017842-001)
•
Oscilloscope
Connections
ECG and impedance respiration:
1.
Connect the 12-lead ECG trunk cable to the green ECG connector in the module.
2. Connect both 5-leadwire sets to the trunk cable and to the simulator.
Invasive pressure:
1.
Connect the dual invasive pressure adapter cable to the red invasive pressure connector
in the module
2. Connect the multiparameter patient simulator with its invasive pressure adapter cables
to the dual invasive pressure adapter cable.
Temperature:
1.
Connect the dual temperature adapter cable to the brown temperature connector in the
module.
2. Connect the multiparameter patient simulator to the temperature adapter cable.