GE HEALTHCARE E-PSMP, Technical Manual

Page: 583 / 622

Patient Data module
16 - 19
2062973-004
•
A PRR reading between 60 and 62 beats per minute.
c. Disconnect the simulator cable from the acquisition device.
d. Mark this task as complete on the checkout form.
14b. SpO
2
functions (Nellcor OxiMax)
a. Verify that 2 AA alkaline batteries are installed in the NELLCOR SRC-MAX Pulse
Oximetry functional tester.
b. On the SRC-MAX, verify that the IR and RED LED indicators are both lit.
c. Verify the SRC-MAX default indicators are as follows:
•
Heart rate = 60 bpm
•
Light = LOW
•
MOD = LOW
d. Verify the following SpO
2
readings for saturation and pulse rate:
•
Saturation (%): 75 ± 2
•
Rate (bpm): 60 ± 2
e. Press and release the heart rate button on the SRC-MAX. Verify default indicators are
lit as follows:
•
Heart rate = 200 bpm
•
Light = LOW
•
%SpO
2
= 75
•
MOD = LOW
f. Verify the following SpO
2
readings for saturation and pulse rate:
•
Saturation (%): 75 ± 2
•
Rate (bpm): 200 ± 3
g. Press and release the light button on the SRC-MAX. Verify default indicators are lit as
follows:
•
Heart rate = 200 bpm
•
Light = HIGH
•
%SpO
2
= 75
•
MOD = LOW
h. Verify the following SpO
2
readings for saturation and pulse rate:
•
Saturation (%): 75 ± 2
•
Rate (bpm): 200 ± 3
i. Press and release the %SpO
2
button on the SRC-MAX. Verify default indicators are lit
as follows:
•
Heart rate = 200 bpm
•
Light = HIGH
•
%SpO
2
= 90
•
MOD = LOW
j. Verify the following SpO
2
readings for saturation and pulse rate: