16
Figure 1-4 Weld the RJ-45 connector with the SFTP cable
Solder the SFTP cable as shown in Figure 2-4. The solder contact requires
that it is small in size so that it may fit into the connector properly.
Attached the antenna
You can attach the proper antenna to the N-type connector on the Halo Series Radio.
Ensure that all connections are sealed with an appropriate “tar type” sealant. Every
Halo includes two packages of Coax-Seal.
To meet regulatory restrictions, the outdoor radio and the external antenna
must be professionally installed.
Connect the Power Cable
Connect the 15V power adapter to the POE injector, and plug the other end to an
electrical outlet (AC 110V~240V).
Wireless Interactive cannot assume responsibility for damage when using the
Halo Series Radio with other types of power adapters.
You should read and carefully follow the installation instructions before
connecting the system to its power source. The outdoor radio and power
injector can be damaged by incorrect power application.
All
connections must
be properly connected before providing power to the radio.
