64
2.
Make sure that you are using one of the following Web
browsers: - Microsoft Internet Explorer version 5.0 or later
- Netscape version 5.0 or later.
3. Ensure that you are not using a proxy server for the connection with your Web
browser.
4. Double-check the physical network connections (includes the cables and the
connectors). Use a well-known unit to ensure the network connection is properly
functioning.
9-3 Configuration Issues
The following problems relate to setup and configuration problems:
These are some basic configurations might make the link fail:
•
RF Channel
•
SSID
•
IP address
•
Rule of MAC address filter
•
Rule of security settings (such as WEP or WPA)
•
Rule of authentication (such as settings of radius server and 802.1x)
•
Configurations of WDS page
Please double-check the configuration in Chapter 3 “Configuring the 802.11 a
Radio”
9-4 Communication Issues
If two radios work within close distance of each other and do not work while separated,
then there are two possible reasons why wireless connectivity isn’t working properly:
An RF path problem is one possibility. For example, poor antenna alignment, the
tower is not tall enough when the radios are installed at a long distance or the
connectors are not seated properly, etc (these are the most common problems in
installations).
The other possibility is interference problems caused by high signal levels from