33
5 - 2 B r i dg e /R ou t e r M o de
From the system setup, click IP Settings, you’ll be navigated into the WAN/LAN Settings.
Figure: 5-2 AP WAN/LAN settings
The Halo Series Radio can be configured in bridge mode or router mode.
Bridge Mode
In Bridge Mode, the AP will act as a pass-through bridging your network, by associating
with various devices. This can extend the radius of your network.
Spanning Tree: Enabling spanning tree can prevent undesirable loops in the network,
ensuring a smooth running network. By default, the function is enabled.
Router Mode
In Router Mode, the radio has two ports, WAN port and LAN ports.
If your network has a requirement to use a different IP addressing scheme, you can make
those changes in this menu. These settings are only required if the Refresh” is chosen.
Remember to click Apply to save your changes.
