ProxiPen and WinDAU Installation Manual
33
35. Open the incident booklet that came with the ProxiPen.
Incident Booklet
36. Remove the white strips on either side and create a label in each block to represent some form of
information that needs to be documented or tracked, such as damage, vandalism, maintenance
cycles, equipment state: present, powered off/on, etc.
37. Once labeled, replace the strips in the incident booklet so that the labels are visible. This will be
used by personnel to denote particular occurrences at a location by first, scanning the control
point tag and then, the incident tag for the type of occurrence, if necessary.
38. Scan the tag(s) from the incident booklet with the ProxiPen. Be sure to note the order in which
the tags are scanned.
39. Place the ProxiPen in the DTU.
40. Select Add Control Points from ProxiPen in the drop down menu.
Summary of Contents for ProxiPen
Page 57: ......