ProxiPen and WinDAU Installation Manual
26
13. From the listing under Tours in 3. Tour Definition, click on Tour 1, so that it is shaded. Tour 1 will
then be the item populated in the next step.
NOTE:
The first tag selected to be moved into a tour will become the start point for the tour.
14. First, click on the item in the Pool that you would like to add to the tour being setup/modified. In
this example, Start Point – Tour 1.
15. Then, click the blue arrow
next to the Pool section. This will move “Start Point – Tour 1” to
be a tag defined under Tour 1. Once this has been done, a checkmark (
9
) will show next to Tour
1 to indicate that this is an active tour.
NOTE:
The Start Point on a tour will be denoted with a checkmark (
9
) in the CPs in Selected
Tour section. An active tour will show with a checkmark in the Tours category.
NOTE:
Each point, when moved to the actual tour, will also remain in the Pool until the point has
been deleted from the Pool area. This can be done by selecting the item, then clicking the black
arrow
to move it to the trash
; or by selecting the item and clicking the Delete button
on your keyboard. Items in the Trash will automatically be deleted upon exit of Tour Definitions.
Copy selected to Tour Definition
Copy selected control points from Tour Definition (including
incidents and personnel) back to the Pool
Copy all available control points from Pool to Tour Definition
Move selected item(s) to Trash
Remove all items from the Trash to the Pool (Trash will
automatically be emptied upon exit of Tour Definitions)
Summary of Contents for ProxiPen
Page 57: ......