ProxiPen and WinDAU Installation Manual
29
23. Select the points (by clicking and holding Ctrl on your keyboard to select multiple points) that you
would like to transfer to the tour and then click the blue arrow to move them into the tour. Be sure
that the appropriate tour is selected under Tours.
NOTE:
Control points can be used as multiple points on multiple tours. Start points can only be
used once ever in WinDAU. Control point tags can also be used as start point tags.
NOTE:
The tour name (Description),under 3. Tour Definition, can also be changed by double-
clicking Tour 1, Tour 2, etc.
The tour in this example now consists of a Start Point, marked with a checkmark, and (3) control points.
If
additional tours or control points need to be added, repeat the steps in Section B until complete.
NOTE:
Control points are added to a tour in no particular order. A tour is considered complete once all
points designated to a tour have been scanned with the ProxiPen.
You will now need to enter the personnel and incidents to complete the basic Tour Definition.
C. Adding Personnel
Adding personnel is exactly the same as adding control points, except that you will be adding them to
the Personnel category rather than to a tour. This allows for flexibility in using personnel on many
different tours.
24. From the options under Tours (on the right), 3. Tour Definition, click the Personnel option at the
bottom.
Summary of Contents for ProxiPen
Page 57: ......