ProxiPen and WinDAU Installation Manual
24
NOTE:
Control point tags can also be used as start point tags.
3. Now, remove as many of the control point tags as will be needed for each point on the tour.
These will be labeled in a similar fashion, but each marking should identify specifically the point in
the tour to be checked.
4. The same will be done with the identification tags. Label each tag to represent a name or label
for personnel.
A. Adding Start Points
5. First, scan one of the larger start tags with the ProxiPen. Do this by removing the pen from the
DTU and bringing it within ¼" – ½” proximity of the tag.
NOTE:
Start points can only be used once ever in WinDAU. Control points can be used as
multiple points on multiple tours. Control point tags can also be used as start point tags.
NOTE:
Tags can be scanned and added to the Pool and Tour Definitions in any order (start tags,
control point tags, personnel tags, etc.). They can also be scanned in one at a time or in groups.
If the tags are being scanned in groups, be certain that the order in which they are scanned is
noted so that they can be labeled correctly in WinDAU.
6. Replace the pen in the DTU.
7. Click Tour Definitions from the main screen in WinDAU.
8. From 1. Add Control Points in the top left, select ProxiPen from the drop down menu.
9. The following dialog box will appear:
Summary of Contents for ProxiPen
Page 57: ......