ProxiPen and WinDAU Installation Manual
20
IV. Dongle Installation
(WinDAU Enterprise Edition only; if you are using WinDAU Standard Edition,
continue to section VI.)
NOTE:
If you do not know if you are using WinDAU or WinDAU Enterprise Edition, please contact your
security, purchasing or network administrator for verification.
NOTE:
If you selected Yes in Section II, step 16 or 17, then proceed to Step 4 for registration. If you
have a dongle and did not select Yes in the aforementioned steps, please follow all instructions in this
section. The
icon on the main screen of WinDAU is a notification that the dongle is recognized by
WinDAU. This icon:
shows that no dongle is recognized by WinDAU.
1. Attach the dongle (see picture below) provided with the copy of the WinDAU Enterprise Edition
software. This should be in the small binder in the front cover.
2. Attach the dongle to the computer via the parallel (printer) port.
NOTE:
Once the dongle is attached securely to the printer port, a printer may be attached to the
dongle. The screws on the dongle must be tightened completely in order for a printer to be attached.
Dongle
: This side connects to computer’s parallel (printer) port.
3. Once the dongle is attached, go to the main screen in WinDAU and click Search in the top left
corner. This will allow WinDAU to search for an attached dongle.
4. Go to the Windows Start button and then to Programs / GCS Office / Software Licensing
Manager.
5. Click Check for License to have SLM verify that the dongle attached is properly licensed. (Be
sure dongle is attached.) WinDAU will first search for a dongle and then for the license.
6. If a license has been found, then proceed to Step 7 for verification.
If a license is not found, then you will need to enter it manually. Click Enter License to manually
enter your license.
Summary of Contents for ProxiPen
Page 57: ......