Mode Setting (OPTION PAGE)
[DEFAULT SETTING: Black & White]
Manual Color Fill:
Select this mode when you would like to designate specific power and speed
settings and link them to certain colors of your image. The LaserPro X380 print driver allows a maximum
of 16 pen parameters to be set.
Print Immediately (Option Page)
[DEFAULT SETTING: Unselected]
Checking this will instruct the LaserPro X380 to immediately begin the laser process, when you select
Print from your graphic software program. If Print Immediately is not checked, then selecting Print will
transfer the job file to the LaserPro X380 system and will need to be initialized from the LaserPro X380
control panel.
File Function (Option Page):
The file function section allows you to manage various laser parameters. This section is useful when
performing repeat jobs on a variety of objects, allowing you to save your frequently used laser parameters
and load them in the future.
History File:
This section contains a list of the recent files you have recently created and worked
with, please note that.
SAVE:
This function will save the current print driver parameter settings to a file and location on your
computer of your selection. (Saved parameter setting files will be tagged with the .H2O extension)
LOAD:
This function allows you load a previously saved print driver parameters.
ORIGINAL:
This function will load the print driver’s original factory parameter settings.
SAVE TO DEFAULT:
This function allows you to save your current print driver parameters as the
default startup settings.
DELETE:
This function will delete the file you select from the History File section. Please note the
delete function only removes the file from the history file section, it does not remove the .H2O file from
your hard drive, if you wish to completely remove the file from your hard disk, and you will have to
manually delete the file from your operating system.)
NOTE
If you are using Windows 2000 or XP as your operating system, then make sure you log
in with an administrator or administrator-rights account in order to properly save laser
parameter settings.
- 57 -
SmartCut X380 User Manual
Distributed & Supported by: Jorlink USA, Inc. | Tel: (336) 288-1613 | [email protected] | www.JORLINK.com
