☼
Navigating to this page:
Set File Save Mode Page
Main Work Page
Press
F4
Functions Page
Select <
Machine Setting
>
from the menu
Machine Setting Page
Select <
Set File Save
Mode
> from the menu
Set File Save Mode
Page
The Set File Save Mode Page allows you to set whether or not the LaserPro SmartCut X380
automatically deletes each job file after processing. Setting File Save to <NO> will automatically
and immediately delete each job file from the LaserPro SmartCut X380 after the cutting process.
Setting File Save to <YES> will retain all job files on the LaserPro SmartCut X380, even after
each job has been processed.
File Save: YES / NO
Set File Save Mode Page
Relevant Buttons
Function
F1 (Back)
Back to previous page
F4 (Save)
Save your current settings
Y
/
Z
Directional
Cycle File Save between YES / NO
Start / Stop
Back to Main Work Page
Auto Focus
Initiate the auto focus function
▲
/
▼
Manual Focus
Buttons
Manually adjust the height of the work table (Z-
axis)
SmartCut X380 User Manual
- 44 -
Distributed & Supported by: Jorlink USA, Inc. | Tel: (336) 288-1613 | [email protected] | www.JORLINK.com
