GCC Technologies LaserPro SmartCut X380 Series User Manual Download Page 22

Page: 22 / 78

Always turn on the water chiller before turning on the machine.

CAUTION

Make sure to add water to the water chiller before turning on the machine.

NOTE

De-ionized water is recommended as the coolant. Propylene glycol can
be used as an anti-freeze agent.

The coolant used with the water chiller should have the following properties:

•

Good heat conduction and low viscosity

•

Anti dirt forming

•

Low

electric

conductivity

< 2

S/cm

•

Non-corrosive

SmartCut X380 User Manual

- 21 -

Distributed & Supported by: Jorlink USA, Inc. | Tel: (336) 288-1613 | [email protected] | www.JORLINK.com

Summary of Contents for LaserPro SmartCut X380 Series















































































Search results

Summary of Contents for LaserPro SmartCut X380 Series

Reviews:

Related manuals for LaserPro SmartCut X380 Series

Brands by name

Popular brands

GCC Technologies LaserPro SmartCut X380 Series, User Manual

Search results

Summary of Contents for LaserPro SmartCut X380 Series

Reviews:

Related manuals for LaserPro SmartCut X380 Series

Brands by name

Popular brands