NOTE
The X380 print driver cannot store more than 16 pen colors or different laser parameter
settings per file.
Speed (Pen Page)
[DEFAULT SETTING: 50]
The speed slider controls the laser machine’s speed during operation with a range setting from 0.1 –
100%. The SmartCut X380’s maximum laser processing speed is 40 inches per second, therefore a
setting of 100% speed is equivalent to 40 inches per second and a 10% speed setting would be
equivalent to 4 inches per second. Keep in mind, this is the speed the laser moves at when cutting
straight lines. The machine will automatically slow down when processing curves.
TIP
Cutting depth and quality are determined by a combination of power and speed. Slower
speeds at higher power will produce deeper cuts, whereas higher speeds at lower
power will produce more shallow cuts.
Power (Pen Page)
[DEFAULT SETTING: 50]
The power slider controls the laser’s power during operation (engraving power) with a range setting from
1 – 100%. The percentage setting represents the power for each laser pulse fired.
TIP
Cutting and quality are determined by a combination of power and speed. Higher power
- 59 -
SmartCut X380 User Manual
Distributed & Supported by: Jorlink USA, Inc. | Tel: (336) 288-1613 | [email protected] | www.JORLINK.com