Jaguar IV User Manual
Accu-Aligning System
5-4
3. Multiple Copies
The function is used to duplicate images to let you cut quantities of images at a time.The
AAS II sensor will automatically scan registration marks for each individual image to ensure
the contour cutting precision.
Command:
Esc.D3;(XCopies);(YCopies);(Space):
Layout:
Condition 1 (Default) Condition 2
5.3 Printer
Test
Before performing AAS contour cutting, it’s recommended to print out a test file that you
can find in the enclosed Installation CD to make sure the AAS II cutting accuracy of
Jaguar IV.
There are two testing files for AASII:
1. AAS II_X_Y_Offset_Caberation_A4 .eps (A4 size)
2. AAS II_X_Y_Offset_Caberation_600_600 .eps (Default setting, it is recommended
for testing)
Print out the testing graphic. ( Please use high precision printer)
Load the graphic to Jaguar IV and sent the file to test the cutting job
If there is any adjustments had to be made, you can change the offset value by
following the steps:
*
Measure the offset values from the printed line and the actual cutting line.
*
Enter the AAS Offset under MISC function for the values you just measured,
then press Enter
*
Test the cutting again
Summary of Contents for J4-101S
