Jaguar IV User Manual
Installation
2-15
) If the user selects yes, a second copy of the driver will be installed.
(2
2.6.2 Parallel Interface
z
Connecting to the Parallel (Centronics) Port
3. Send the data to your cutting plotter directly. Or, use DOS commands like
TYPE
or
to output data.
tion!! Please turn off the plotte before plugging the print cable.
1. Connect a parallel cable to the cutting plotter and the host computer
2. Set up the output port
LPT1
or
LPT2
from your software package
Cau
r
.6.3 RS-232
Interface
Connecting to the RS-232 (Serial) Port
connect the RS-232C cable to the serial
mputer.
ts/Parity) to match the
Caution!! Please turn off the plotter before plugging the RS-232C cable.
2
z
1. For IBM PC, PS/2 users or compatibles,
connector of the assigned serial port (COM1 or COM2) of your host co
2. Set up the communication parameters (Baud Rate and Data Bi
setting of software package, refer to chapter 3 – “Misc” key description.
2.6.4 Data Transmitting
here are two options to transmit the data from the computer to the cutting plotter:
Option 1:
With proper interface settings, the data can be transmitted from your application
T
software package to the cutting plotters directly.
Summary of Contents for J4-101S
