GCC Technologies J4-101S, User Manual

Page: 19 / 130

Jaguar IV User Manual
Installation
2-8
2.4 Blade Installation
of the blade
holder and remove the blade by pushing the pin. Make sure that your fingers are away from
the blade tip.
Figure 2-12 is the illustrator of the blade holder. Insert a blade into the bottom
Pin
Outward ring
Adjustment depth knob
Step 1
Install blade (Figure 2-13).
Step 2
ush the blade to the bottom of the blade holder. (Figure 2-14). P
Step 3
Adjust the blade tip to suitable length by screwing
“Blade tip adjustment screw” clockwise or
ount-clockwise. (Figure 2-15). c
Figure 2-15
Figure 2-14
Tips:
“The proper length” means the blade’s
length is adjusted 0.1mm more than
film’s thickness. That is, if the thickness
of film is lade’s length is
properly adjusted 0.6mm and it can
t through the film layer yet
avoid penetrating the backing.
gure 2-12 Fi
0.5mm, then b
completely cu
Figure 2-13