gc Labolight DUO, Instructions For Use Manual

Page: 26 / 176

< Mounting method >
17
16 15
13
14
B(A)
D
4) As the front and back surfaces of the lens cover has a difference
in profi les, ensure the proper orientation where the hole of the lens
cover [D] aligns with the protrusion of the lens cover holder near the
concave [B(A)].
5) By slightly bending the lens cover outward, insert the notch [right
17
16 15
13
14
E
C
angle] of the lens cover [E] into the wing of the lens holder [C].
6) Slide the lens cover for mounting.
17
16 15
13
14
7) Verify that the protrusions of the lens cover holder [B] engage with
2 5
12
17
the lens cover hole [D].
EN 24