gc Labolight DUO, Instructions For Use Manual

Page: 12 / 176

3.2.2 Control panel
[B-7]
[B-8]
[B-6]
[B-5]
[B-4]
[B-1]
[B-2]
[B-3]
No. Name Information
[B-1] Display Displays statuses of various devices.
[B-2] Step mode indicator Lit during irradiation in the step mode.
[B-3] Time display
− Displays remaining time of irradiation in the step or full mode.
− Blinking display of time indicates a temporary halt.
Standby status with the door opened
(= standby status in the step mode)
Standby status with the door closed
(= standby status in the full mode)
When the full mode is properly
completed, “Fin” is displayed.
If an error occurs, an errornumber is
displayed.
[B-4] Door open indicator
Unlit: Indicates the door closed.
Lit: Indicates the door opened.
[B-5] Over heat indicator
Blinking: Temperature alarm
− Alerts high temperature of LEDs due to continuous use.
− Ensure a sufficient intermission, as the LEDs are nearly overheated.
Lit: Overheat
− Lit if irradiation is temporarily halted due to high LED temperature.
[B-6] Error indicator
Lit if an error occurs.
(For details of errors, see Chapter 7, “Troubleshooting.”)
[B-7]
Curing time key
(1/1.5 /3/5)
A press starts irradiation in the full mode.
The time of irradiation is 1, 1.5, 3, and 5 minutes, respectively.
Successive presses add time, enabling continuous irradiation for as long as
10 minutes.
[B-8] Stop key
Press it when stopping irradiation in the step or full mode or when resetting a
temporary halt.
Other operating unit
[A-13] Step mode switch
A press starts irradiation for 10 seconds in the step mode.
Successive presses add time, enabling continuous irradiation for as long as
30 seconds.
EN 10