![background image](http://html1.mh-extra.com/html/gbc/titan-110/titan-110_operation-and-maintenance-manual_3898577096.webp)
Page 8 - 3
Maintenance
Titan 110/ 165 Operation and Maintenance Manual
© GBC Films Group November 2000
Tools required
• Damp cloth
( Use water only to dampen the cloth )
• Rubber cement eraser
( a belt sander dressing block may be used
instead )
• Several 100% cotton terry cloths
( best for lint free cleaning )
• 3M™ Scotchbrite™ pad
Preparation of the laminator
a) Turn the POWER to the “I ”.
b) Ensure no E-STOP is depressed and all safety
latches are in the fully locked position.
INFORMATION
The laminator will operate only when
all safety latches are in the fully
latched position.
c) Press
on TOP TEMPERATURE and
BOTTOM TEMPERATURE to 225
o
F
( 107
o
C )
If the rolls are heated, proceed to
Removing adhesive build up..
INFORMATION
d) Lower the main rollers.