![background image](http://html1.mh-extra.com/html/gbc/titan-110/titan-110_operation-and-maintenance-manual_3898577063.webp)
Operations
Page 5 - 6
Titan 110/ 165 Operation and Maintenance Manual
© GBC Films Group November 2000
5.2 Reacting to an emergency
The Titan 110/ 165 Laminator has been
designed with safety as a primary consideration;
however, you must become thoroughly familiar with
the controls, proper operation, proper service
procedures, and safety features of the laminator before
using or servicing the unit.
Use care in lowering the top laminating roller
and know how to react quickly in an emergency. Before
lowering the roller, ensure the nip area is clear.
One E-STOP is located on the left cabinet from
the front operating position and the second is located
above the main power ON/ OFF. Refer to Figure 5.2.1
Figure 5.2.1 E-STOPs
E-STOP
FRONT
REAR
a) In the event of an emergency, press an
E-STOP.
Press down
INFORMATION
W h e n a n E M E R G E N C Y S T O P i s e n g a g e d ,
all motion stops. The nip will not change
from the operating setting.
b) Resolve the emergency situation.
c) Press
S T O P
.
INFORMATION
When the E-STOP is disengaged, the
rollers will begin turning. By pressing
stop first, The rollers will not turn
until RUN is pressed