Page 4 - 13
Installation
Titan 110/ 165 Operation and Maintenance Manual
© GBC Films Group November 2000
4.7 Control panel check
The control panel should be checked to ensure
all controls function properly.
For a detailed explanation of the control panel
and footswitch refer to Section 5 Operations.
INFORMATION
When any command is pressed on the
control panel, an audible "beep" will
be heard for each increment of
change or each press.
a) Press POWER to “ I ” .
On/ Off
b) Press
STAND-BY
. The display indicates AUTO-
OFF mode in the lower right corner.
c) Press
STAND-BY
again. The display indicates
READY mode in the lower left corner.
d) Press
M E M O R Y
. An audible beep is heard.
M E M O R Y
is explained in Section 5 Operations
