![background image](http://html1.mh-extra.com/html/gbc/titan-110/titan-110_operation-and-maintenance-manual_3898577015.webp)
Page 1 - 4
Safety
Titan 110/ 165 Operation and Maintenance Manual
© GBC Films Group November 2000
To continue operation, both E-STOPS must
be in the up position. To reset the E-STOP, twist the
button 1/4 turn clockwise.
Rotate 1/4 turn
INFORMATION
The laminator will operate only when
all safety latches are in the fully
latched position.
1.3 Installation
The following symbols are positioned at
various points in Section 4 Installation.
CAUTION
Failure to follow the pre-installation check
list can result in damage to the laminator.
W A R N I N G
The operating environment must be free of
dust, flammable liquids and vapors. You can
be injured by inhaling chemical vapors.
W A R N I N G
Vapor build up or stored flammable liquids
can cause a fire. Excessive dust can damage
the laminator.