![background image](http://html1.mh-extra.com/html/gbc/oorca-iii/oorca-iii_operation-manual_571021062.webp)
ORCA-III Operation Manual
Maintenance and Troubleshooting
GBC Pro-Tech 1997 October
4-5
&KDLQ 7HQVLRQLQJ DQG 7DNH8S
Smaller chain adjustments on the ORCA-III
laminator are handled by the chain tensioning
sprockets and the inner drive chain take-up, however,
when installing a new chain or when the chain is
more seriously out of adjustment, use the following
procedures to adjust the chain tension.
Tools required:
•
5
/
32
" hex wrench
•
1-
1
/
8
" wrench
•
13 mm wrench
To adjust the inner drive chain tension:
WARNING
Remove power from the laminator (the air
should remain connected) and make sure it
won’t be reapplied while you are performing
this procedure. You could be severely
shocked, electrocuted, or get your fingers
caught in the drive mechanisms.
1.
Open the drive side cabinet cover using
5
/
32
" hex
wrench by removing the four screws holding the
cover in place.
2.
Loosen the nut that secures the inner chain
tension adjuster sprocket using the 1-
1
/
8
" wrench.
Inner
Chain
Tension
Adjuster
Sprocket
Motor
Sprocket
Inner
Chain
Inner
Chain
Take Up
Outer
Chain
Outer
Chain
Tension
Adjuster
Sprocket
Inner
Chain
Tension
Check
Location
Outer
Chain
Tension
Check
Location
Figure 4-7:
Location of the Inner and
Outer Chain Adjustments
3.
Move the adjuster sprocket until there is
approximately ½" play measured at the inner
chain tension check location.
4.
Tighten the nut that secures the inner chain
tension adjuster sprocket using the 1-
1
/
8
" wrench.
5.
Replace the cabinet cover and reapply power to
the laminator.
Summary of Contents for OORCA-III
