GBC OORCA-III, Operation Manual

Page: 72 / 109

ORCA-III Operation Manual Technical Information

GBC Pro-Tech 1997 October
6-1
6HFWLRQ 7HFKQLFDO ,QIRUPDWLRQ
6SHFLILFDWLRQV
Table 6-1. ORCA-III Laminator Specifications
Characteristic Specifications
Dimensions
(L x D x H) 82" x 33" x 60"
(2.1 x .84 x 1.52 m)
Weight Uncrated: 2500 lbs (1179 kg)
Laminating Rolls 61" (155 cm) roll face with
thermally conductive high
release silicone surface; upper
and lower main rolls internally
heated; temperature controlled
by state-of-the-art infrared
sensors and digital PID
controllers
Laminating Opening 1.5" (3.8 cm) maximum opening
controlled with dual air
cylinders.
Laminating Material Uses heat activated and
pressure-sensitive materials 0 -
55" (0 - 140 cm) wide on a 3"
(7.6 cm) ID core
Laminating Speeds 0 to 14.5 fmp (0 to 4.5 mpm)
Post Lamination Fanless cooling system provides
uniform, filtered air for thermal
shock without exposure to
dangerous fan blades.
Vinyl Transfer Complete roll to roll transfer,
lamination, and edge trimming
in one pass
Safety Features
•
Two emitter-receiver
photoelectric systems
protect rolls from damage.
•
Emergency kick cables front
and rear.
•
All electrical and moving
mechanical parts are
located in bolted cabinets
•
Four emergency stop
buttons
Installation
Requirement 220 to 240 VAC, 50/60 Hz, 55
A. Or, in Europe only, 3-N
phase, 32 A per phase.
Air: 2 cfm at 100 psi, minimum
(0.5 m
3
at 700 vPa)