GBC Falcon 60+ (-1), Operation And Maintenance Manual

Page: 14 / 64

14
I
SPECIFICATIONS
Operating Speed:
0 fpm to 18 fpm (5 mpm)
Maximum Film Width:
60 in. (152 cm)
Maximum Mounting Gap:
3/4 in. (1.91 cm)
Maximum Temperature:
270 O F (132 O C)
Dimensions (W x L x H):
Unit alone: (Figure 1)
79 in. x 33 in. x 57 in.
(201 cm x 84 cm x 145 cm)
Shipping:
85 in. x 44.5 in. x 78 in.
(216 cm x 113 cm x 198 cm)
Weight:
Unit alone: 1498 lb. (679 kg.)
Shipping: 1900 ib. (862 kg.)
Electrical Requirements:
Refer to the serial plate located on
the rear of the laminator for the
specific electrical rating applicable
to the unit.
Voltage:220V~60 Hz
Current: 24.5A
Power: 5500 W
Phase: Single
FCC NOTE: This equipment has been
tested and found to comply with the
limits for a Class A digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is
operated in a commercial enviroment.
This equipment generates, uses, and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instruction
manual, may cause harmful
interference to radio communications.
Operation of this equipment in a
residential area is likely to cause
harmful interference in which case
the user will be required to correct the
interference at his/ her own expense.
Changes or modifications not
expressly approved by General
Binding Corporation could void the
users authority to operate the
equipment.
This Class A digital apparatus
complies with Canadian ICES-003.
(Cet appareil numerique de las
Classe A est conforme a la norme
NMB-003 du Canada)
Fig. 1
79 in.
(201 cm)
57 in.
(145 cm)
33 in.
(84 cm)
Preliminary
Copy