Page 4 - 8
Installation
F - 160 CE Operation and Maintenance Manual
© GBC Films Group April 2000
4.6 Accessory pack
Once the Falcon 160 CE Laminator has been
unpacked and moved into final position, open the accessory
pack and verify the contents.
Accessory Pack contents
• One T-handle allen wrench ( 475-200 )
• One Zippy knife ( 475-620 )
• One Terry clothe towel ( 475-950 )
• One Operators manual ( 930-045 rev. A )
• One roll masking tape ( 475-000 )
• Two Polyurethane O-rings ( 480-005 )
• One strain relief for main power ( 175-201 )
• One rubber cement pad ( 930320 )
• One crankhandle ( 629-018 )
• One fuse, 0.5A ( 186-022 )
• Two fuses, 2.5A ( 186-220 )
• Four leveling bolts ( 645-011 )
• Twelve 3/4 - 10 nuts ( No P/N )
If you are missing any of the itemslisted above,
contact your local service technician or sales
representative.
Contacts:
GBC Parts ( 800 ) 790 - 7787
GBC Europe parts 33 - 45 - 535 - 7676
b) Remove any plastic strapping and/or packing
paper taped to the rollers.
CAUTION
Do not use a knife or other sharp object to
remove the shrink wrap from around the
laminator. You can cause irreparable
damage to the rollers.
c) Remove all packing materials to a safe distance
from the laminator and dispose of properly.
d) Use two people to carefully roll the laminator to
the desired location.
About recycling: The crate components can
be reused for shipping the laminator again
or can be disassembled and the wood and
screws recycled. The shrink wrap is not
recyclable, so it must be discarded.
INFORMATION
