![background image](http://html1.mh-extra.com/html/gbc/f-160-ce/f-160-ce_operation-and-maintenance-manual_3938449065.webp)
Page 5 - 8
Operations
F - 160 CE Operation and Maintenance Manual
© GBC Films Group April 2000
Caution should always be exercised
when using the laminator with
the safety shields raised.
You can be seriously HURT or INJURED!
W A R N I N G
• Raise the safety shield.
INFORMATION
When a safety shield is raised while pressing
on the variable speed footswitch, the speed
may be faster or slower than the indicated
panel speed.
INFORMATION
When the safety shield is raised, the
laminator will only run while the variable
speed footswitch is depressed.
• Adjust for desired speed using the variable
speed footswitch.
INFORMATION
Footswitch speed is not indicated in the
SPEED DISPLAY on the control panel.
To lower the safety shield
• Lower the safety shield.
INFORMATION
When the safety shield is lowered, speed
reverts to the panel speed setting.
• Press and hold GO for 3 -4 seconds before
releasing the variable speed footswitch.
• Release the variable speed footswitch.
• Release GO. GO reverts to solid.