Page 4 - 11
Installation
F - 160 CE Operation and Maintenance Manual
© GBC Films Group April 2000
4.8 Leveling
Leveling of the laminator is very important in the
way the machine performs. Leveling is crucial to the tram
( tracking ) of the materials through the machine.
a) Position the level on the top of the control side
frame. Not on the cabinet. Refer to Figure
4.8.1 Front to back control side
4.8.1 Front to back control side
Level
The side frame provides a more accurate
reading than the cabinet.
INFORMATION
b) Level the control side from front to back by
holding the nut inside the leg and turning the nut
below the leg with the wrench.
INFORMATION
A second person can read the level while you
make the appropriate adjustments.
- To raise; raise the nut inside the leg and turn
the nut below the leg clockwise.
Raise
Turn clockwise
- To lower; turn the nut below the leg counter
clockwise.
Turn counter
clockwise
Lowering
limit
