Page 6 - 1
Applications
F - 160 CE Operation and Maintenance Manual
© GBC Films Group April 2000
Section 6 Applications
To assist you with a variety of web ups, please
refer to the process control charts and diagrams.
Process control charts allow you to record the
way you thread film through the machine’s rollers ( called
webbing ) and the control settings for each application
with regards to your products.
This section contains a blank process control chart
and diagram for the Falcon 160 CE as well as completed
charts and diagrams for the basic operations of the
laminator. It is recommended that you make copies of the
blanks and fill them in as needed.
W A R N I N G
Do not wear ties, loose fit clothing or
dangling jewelry while operating or
servicing the laminator. These items can get
caught in the nip and choke you or you can
be crushed or burned.
The procedures and parameters described
in this section are reference points only. Parameters
will vary with regards to laminate thickness, laminate
widths, laminate types, print types, ink or toner types,
environment conditions, operator experience and
various substrates.
