Gateway WGR-250, User Manual, Page: 85 / 124

79
Advanced settings
www.gateway.com
7
On the same line, enter the static
IP Address
of the computer that runs the application
or provides the service.
8
On the same line, click to select the
Enable
check box to turn on access to the
application or service.
9
For special applications where the computer sends data out from a different port than
it receives data from, click
Port Triggering
to set up the access point/router to monitor
outgoing data for specific port numbers so the access point/router can direct the
requested incoming data to the same computer. The Port Trigger List page opens.
a
On the first available line, type the Application Name in the
Application Name
box.
b
On the same line, under
Trigger Port Range
, type the outgoing port range used by
the application or service.
c
On the same line, under
Incoming Port Range
, type the incoming port range used
by the application or service.
d
Click
Apply
to save your entries.
-OR-
Click
Cancel
to delete your entries.
e
Click
Close
to close the page and return to the Advanced (Ports) page.