Gateway WGR-250 User Manual Download

Page: 68 / 124

Chapter 6: Routine Access Point/Router Settings and Status

www.gateway.com

Click the

Upgrade

button. The Upgrade Firmware dialog box opens.

Click

Browse

and locate the file you downloaded on your computer. Click the file,

then click

Open

. The file name and path appear in the

File Path

box.

Click the

Upgrade

button and wait while the file is loaded into firmware.

After the firmware upgrade is complete, return to the Setup page and make sure that
the new firmware version and date are shown.

To exit the Gateway Wireless Router Setup utility, close your browser or type another
address in the browser’s address field and press

NTER

Caution

Do not turn off or reset the access point/router while the
firmware is being upgraded. This may cause problems with
the access point/router.

Summary of Contents for WGR-250





























































































































Search results

Summary of Contents for WGR-250

Reviews:

Related manuals for WGR-250

Brands by name

Popular brands

Gateway WGR-250, User Manual

Search results

Summary of Contents for WGR-250

Reviews:

Related manuals for WGR-250

Brands by name

Popular brands