Gateway WGR-250 User Manual Download

Page: 57 / 124

Sharing drives and printers

www.gateway.com

Click/Double-click the

Network Connections

Network and Dial-up Connections

icon.

Right-click the network connection icon that you want to set up file and printer
sharing on, then click

Properties

Click

Install

Click

Service

, then click

Add

Click

File and Printer Sharing for Microsoft Networks

, then click

If prompted, restart your computer.

Repeat this procedure on every computer on the network.

Turning on file and printer sharing in Windows Me or
Windows 98SE

To turn on Windows file and printer sharing in Windows Me or Windows 98SE:

Right-click the

My Network Places

icon on your desktop, then click

Properties

Click

File and Printer Sharing for Microsoft Networks

Click

If prompted, restart your computer.

Repeat this procedure on every computer on the network.

Sharing drives or folders

If you want to share a drive or folder, use the following instructions.

To share drives or folders:

Make sure that each computer on your network has Windows file and printer sharing
turned on by following the steps in

“Turning on file and printer sharing in

Windows XP or Windows 2000” on page 50

and

“Turning on file and printer sharing

in Windows Me or Windows 98SE” on page 51

Summary of Contents for WGR-250





























































































































Search results

Summary of Contents for WGR-250

Reviews:

Related manuals for WGR-250

Brands by name

Popular brands

Gateway WGR-250, User Manual

Search results

Summary of Contents for WGR-250

Reviews:

Related manuals for WGR-250

Brands by name

Popular brands