Gateway GT110 Series, User Manual

Page: 71 / 100

57
Setting a system password
1 Use the up/down keys to select a password parameter (Set Supervisor
Password or Set User Password), then press <
Enter >.
A password box will appear.
2 Type a password then press < Enter >.
The password may consist of up to six alphanumeric characters
(A-Z, a-z, 0-9).
3 Retype the password to verify the first entry then press < Enter > again.
4 Press < F10 >.
5 Select Yes to save the new password and close the Setup Utility.
Changing a system password
1 Use the up/down keys to select a password parameter (Set Supervisor
Password or Set User Password), then press <
Enter >.
2 Type the original password then press < Enter >.
3 Type a new password then press < Enter >.
4 Retype the password to verify the first entry then press < Enter > again.
5 Press < F10 >.
6 Select Yes to save the modified password and close the Setup Utility.
Set Supervisor
Password Press < Enter > to configure the supervisor
password.
Set User
Password Press < Enter > to configure the user
password.
Password On
Boot Select Enabled to activate security check
during POST.
Disabled
Enabled
TPM Support
(optional) Enables or Disables TPM support. Disabled
Enabled
Parameter Description Options