Gateway GT110 Series, User Manual

Page: 38 / 100

3 System upgrades
24
Opening the server
Caution: Before you proceed, make sure that you have turned off the
system and all peripherals connected to it. Read the
Pre-installation instructions section on page 22.
You need to open the server before you can install upgrade components.
The left side panel is removable to allow access to the server’s internal
components. Refer to the following sections for instructions.
Removing the side panel
1 Perform the pre-installation instructions described on page 22.
2 Remove the two thumb screws on the back panel (1).
3 Slide the locking switch down (2) and slide the side panel toward the
rear of the chassis to disengage it (3).