Gateway E-4650 System Manual Download Page 89

Page: 89 / 134

CD drive problems

An audio CD will not play.

The computer does not recognize the CD drive.

Probable cause

Solution

The CD is loaded incorrectly

Make sure the label is facing up, then try again.

The CD is scratched or dirty

Try cleaning the CD with a lint-free cloth. Make
sure the CD is not scratched.

Probable cause

Solution

The CD is not intended for PC
use

Make sure the CD is PC-compatible.

The CD drive needs to be
added as new hardware

In the Control Panel window, double-click

Add

New Hardware

. Follow the on-screen

instructions for adding the drive.

The secondary IDE device
may be disabled

Restart your computer, then press

to open

the BIOS Setup utility program. From the

Advanced | IDE Configuration

menu, set the

IDE Controller

Both

and the

Secondary

IDE Master

Auto

The CD cables are not
installed correctly

Open the computer and make sure all cables
between the CD controller and the CD drive
are connected correctly.

The CD drive may be
defective

Replace the CD drive.

Summary of Contents for E-4650







































































































































Search results

Summary of Contents for E-4650

Reviews:

Related manuals for E-4650

Brands by name

Popular brands

Gateway E-4650, System Manual

Search results

Summary of Contents for E-4650

Reviews:

Related manuals for E-4650

Brands by name

Popular brands